Foam Filled
Hull sides and deck boxes are foam-filled and sprayed with a vinyl-ester barrier coat — quieter underway, better insulated, safer.
By the Numbers
Built to Last
Hull sides and deck boxes are foam-filled and sprayed with a vinyl-ester barrier coat — quieter underway, better insulated, safer.
Gel-coated hulls and decks with a vinyl-ester barrier coat from the waterline down to prevent osmotic blistering.
One-piece, fully gel-coated stringer system bonded with Methacrylate for a strong, low-maintenance chemical bond.
Sea Pro Standard
The 210 comes loaded — every feature below is standard, backed by the 10-year hull warranty.
Make It Yours
Build the 210 your way — a selection of factory options at the Build-A-Boat.
Customize
Choose Your Power
Boater-first means you pick the brand — the 210 runs up to 200 HP.
210 Bay or 210R Bay
Same hull, same power, same standard features. Add Seakeeper Ride to the 210 Bay and it becomes the 210R Bay. That’s the whole difference.
Seakeeper Ride is a Vessel Attitude Control System (VACS) that eliminates up to 70% of pitch and roll underway. It replaces traditional trim tabs with an automatic, intuitive system — for a flatter, drier, more comfortable ride from the helm.
Gallery
Pricing
*Prices may not include taxes, freight, trailer, or other additional charges. These costs, if applicable, will be communicated by your local Sea Pro dealer.
Questions & Answers
Price, power, towing, draft and more, straight from the 210’s spec sheet.
The Sea Pro 210 Bay starts at $59,790. The boat as shown, with options, has an MSRP of $74,061.
The final price depends on the outboard you choose and the options you add, and may not include taxes, freight, a trailer or dealer charges. Build-A-Boat prices your exact boat, and your dealer gives the final quote.
The 210 Bay is rated for up to 200 HP. Sea Pro is choose-your-power, with factory packages including the Suzuki DF 150 ATX, Mercury 150 XL, Suzuki DF 200 APX, Yamaha 200 XB and Mercury 200 XL V6.
The engine makers’ performance bulletins for the 210 Bay, with speed and fuel burn, are linked under Choose Your Power.
The 210 Bay is 20'8" long with a beam of 8'4", and weighs 2,595 lbs dry, without the engine.
For towing weight, add the outboard (525–531 lbs for the factory options), about six pounds per gallon of fuel (roughly 370 lbs with 61 gallons aboard), your gear and the trailer, and stay comfortably under your vehicle’s towing rating.
At 8'4" wide, it is within the standard 8'6" legal trailer width. On the trailer, the top stands 122" (10'2") high, so measure your garage door before planning on indoor storage.
The 210 Bay has a published draft of 12". That is static draft: how deep the hull sits at rest. The water you can run and get on plane in depends on load, trim, motor height and setup.
A 8" hydraulic jack plate is available as an option, so you can raise the outboard in skinny water and lower it for rough water.
15° at the transom. Deadrise is the angle of the hull bottom: the more of it, the softer the ride in a head sea; the less, the shallower the boat floats and the steadier it sits at rest.
Across the Sea Pro lineup, deadrise runs from 15° on the 172 Bay to 24.5° on the 322R Offshore.
The 210 Bay has a passenger capacity of 7. Count everyone aboard, children included, and remember that the outboard, fuel and gear all add to the load.
61 gallons of fuel.
Range depends on the engine, speed, load and sea state; the engine makers’ performance bulletins under Choose Your Power list speed and fuel burn through the rpm range. Plan by the rule of thirds: a third of your fuel out, a third back, and a third in reserve.
Standard fishing equipment on the 210 Bay:
More is in the factory options, listed under Optional features.
Highlights of the standard equipment:
29 features come standard, backed by the 10-year hull warranty. See the full list.
Yes, as an option. Seakeeper Ride is a factory option on the 210 Bay (ordered with it, it is the 210R Bay).
Seakeeper Ride is a vessel attitude control system that replaces traditional trim tabs and, according to Seakeeper, eliminates up to 70% of pitch and roll underway, for a flatter, drier ride. The R in a Sea Pro model name means Ride-equipped. More on the R.
A 10-year limited hull warranty covering structural defects in the fiberglass hull, which can transfer to a later owner after a re-certification inspection, plus a 5-year limited warranty on the boat: parts and labor in year one, parts in years two through five. Outboards are covered by the engine maker’s own warranty. Read the full warranty.
In Whitmire, South Carolina, where every Sea Pro is hand-laid. Hulls and decks are gel-coated, with a vinyl-ester barrier coat from the waterline down against osmotic blistering; hull sides and deck boxes are foam-filled; and the one-piece, fully gel-coated stringer system is bonded with methacrylate.
Through Sea Pro’s 65 authorized dealers across the United States. Find your dealer to see the 210 Bay in person and get a quote, price it first in Build-A-Boat, or request the catalog.
The Bay Series
Same hand-laid build quality, the same 10-year hull warranty, and the same choose-your-power promise across the family.
