Offshore, off-line. A yacht-certified 28-footer built to spend more time off the grid — with Seakeeper Ride, a glass bridge helm, and room for the whole crew.
By the Numbers
Offshore, off-line. A yacht-certified 28-footer built to spend more time off the grid — with Seakeeper Ride, a glass bridge helm, and room for the whole crew.
Built to Last
Hull sides and deck boxes are foam-filled and sprayed with a vinyl-ester barrier coat — quieter underway, better insulated, safer.
Gel-coated hulls and decks with a vinyl-ester barrier coat from the waterline down to prevent osmotic blistering.
One-piece, fully gel-coated stringer system bonded with Methacrylate for a strong, low-maintenance chemical bond.
Sea Pro Standard
The 292 comes loaded — every feature below is standard, backed by the 10-year hull warranty.
Make It Yours
Build the 292 your way — a selection of factory options at the Build-A-Boat.
Customize
Choose Your Power
Boater-first means you pick the brand.
292R Offshore
Every 292R Offshore leaves the factory fitted with Seakeeper Ride — the R means Ride-equipped, and on this model it comes standard.
Seakeeper Ride is a Vessel Attitude Control System (VACS) that eliminates up to 70% of pitch and roll underway. It replaces traditional trim tabs with an automatic, intuitive system — for a flatter, drier, more comfortable ride from the helm.
Gallery
Pricing
*Prices may not include taxes, freight, trailer, or other additional charges. These costs, if applicable, will be communicated by your local Sea Pro dealer.
Questions & Answers
Price, power, towing, draft and more, straight from the 292’s spec sheet.
The Sea Pro 292R Offshore starts at $234,483. The boat as shown, with options, has an MSRP of $288,595.
The final price depends on the outboard you choose and the options you add, and may not include taxes, freight, a trailer or dealer charges. Build-A-Boat prices your exact boat, and your dealer gives the final quote.
The 292R Offshore is NMMA Yacht Certified, so it has no maximum horsepower rating. Sea Pro is choose-your-power, with factory packages including the twin Suzuki DF 300 APX, twin Suzuki DF 350 ATX, twin Yamaha 300 XCB and twin Mercury 350 Verado.
The engine makers’ performance bulletins for the 292R Offshore, with speed and fuel burn, are linked under Choose Your Power.
The 292R Offshore is 28'6" long with a beam of 9'10", and weighs 6,800 lbs dry, without the engine.
For towing weight, add the outboard (1,124–1,494 lbs for the factory options), about six pounds per gallon of fuel (roughly 1,050 lbs with 175 gallons aboard), your gear and the trailer, and stay comfortably under your vehicle’s towing rating.
At 9'10" wide, it is over the standard 8'6" legal trailer width, so some states require an oversize permit to tow it. On the trailer, the hard top stands 134" (11'2") high, so measure your garage door before planning on indoor storage.
The 292R Offshore has a published draft of 22". That is static draft: how deep the hull sits at rest. The water you can run and get on plane in depends on load, trim, motor height and setup.
22.5° at the transom. Deadrise is the angle of the hull bottom: the more of it, the softer the ride in a head sea; the less, the shallower the boat floats and the steadier it sits at rest.
Across the Sea Pro lineup, deadrise runs from 15° on the 172 Bay to 24.5° on the 322R Offshore.
175 gallons of fuel, plus a 20-gallon freshwater tank.
Range depends on the engine, speed, load and sea state; the engine makers’ performance bulletins under Choose Your Power list speed and fuel burn through the rpm range. Plan by the rule of thirds: a third of your fuel out, a third back, and a third in reserve.
Standard fishing equipment on the 292R Offshore:
More is in the factory options, listed under Optional features.
Highlights of the standard equipment:
54 features come standard, backed by the 10-year hull warranty. See the full list.
Yes. Seakeeper Ride is standard on the 292R Offshore.
Seakeeper Ride is a vessel attitude control system that replaces traditional trim tabs and, according to Seakeeper, eliminates up to 70% of pitch and roll underway, for a flatter, drier ride. The R in a Sea Pro model name means Ride-equipped. More on the R.
A 10-year limited hull warranty covering structural defects in the fiberglass hull, which can transfer to a later owner after a re-certification inspection, plus a 5-year limited warranty on the boat: parts and labor in year one, parts in years two through five. Outboards are covered by the engine maker’s own warranty. Read the full warranty.
In Whitmire, South Carolina, where every Sea Pro is hand-laid. Hulls and decks are gel-coated, with a vinyl-ester barrier coat from the waterline down against osmotic blistering; hull sides and deck boxes are foam-filled; and the one-piece, fully gel-coated stringer system is bonded with methacrylate. Certification: Yacht Certified.
Through Sea Pro’s 65 authorized dealers across the United States. Find your dealer to see the 292R Offshore in person and get a quote, price it first in Build-A-Boat, or request the catalog.
The Offshore Series
Same hand-laid build quality, the same 10-year hull warranty, and the same choose-your-power promise across the family.
